ICA -- Pulse Valves

Cartridge Dust Collectors

Bag Dust Collectors

Mist Collectors

Oil Mist Collector

Fume Collectors

Rotary Valve & Feeders

Fans & Blowers

Dust Collector Parts

Air Inlet System

Pulse Valve

Product Descriptions:

Pulse valve (diaphragm valve) is the "switch" for compressed air in the dust clean blowing system of the pulse bag filter. Controlled by the output signals of the pulse jet control device, it makes dust clean to the filter bags cell by cell to keep the resistance of dust collector within the set range and thus guarantee the processing functions and the dust collecting efficiency of dust collector

3 Series of Pulse Valves:

PV-Y series electro-magnetic pulse valves are embedded valves (also called submergedones), which are directly installed on the manifold box. They have better flow characteristics and operate with reduced pressure loss. Therefore, they are suitable for conditions where the pressure of the gas source is relatively low.

PV-Z series electro-magnetic pulse valves is a right-angle valve, with the 90 angle between the inlet and outlet, which is suitable for the installation connection between the gas dome and the baghouse blow tube to provide good air flow and dust clean pulses satisfying the requirements.

PV-ZM series electro-magnetic pulse valves are the right-angle valve same as series "z" which is suitable foe the installation connection between the gas dome and the baghouse blow tube. There are fixed nut at both ends, which make it easy to install and use the valve

Technical Data:

Working Pressure	0.2MPa ~0.6MPa
Working Media	Clean air
Voltage	DC24V	AC110V	AC220V
Current	0.8A	0.46A	0.23A
Temperature Level	–25℃～80℃ –13℉～176℉	–25℃～150℃ –13℉～302℉	–25℃～230℃ –13℉～446℉
Relative Humidity of Air	≤85%
Diaphragm Life	One million blows or 3 years

>> More information about this product.